Important notes:

1. Bu bir diy yedek parça kitidir ve teslim alındığında kendi kendine montaj ve lehimleme gerektirir. Basic hands-on skills are a must!

2. Kit includes copper standoffs, all required screws, circuit board, all electronic components and an acrylic assembly case. all accessories are configured after our actual assembly and testing, so mismatched parts are not a common issue!

3. Kasa akrilikten yapılmıştır ve yüzeyinde koruyucu bir film bulunur; sadece soyun. It is not wooden!

4. The instruction manual is in electronic version. please read the steps carefully before assembly. if you have difficulty assembling, check the actual photos several times as a reference! in addition,

            A complete assembly video (suitable for both transparent and black versions) is available on the product details page—please watch it repeatedly.

5. When assembling, Loosely screw the movable shaft bolts, not too tight.—over-tightening may cause poor rotation!

6. Tighten the fixing bolts firmly. Instead!

7. Be sure to adjust the limit direction of the servo first during assembly, otherwise reverse installation may occur easily.

8. As an acrylic-assembled kit for learning and practice, the arm has limited torque and Can only grip light objects.

9. Please purchase with caution if you have poor hands-on skills or mind the above points! thank you very much for your support and understanding—we will keep striving to do better.

10. Wish you a smooth assembly and a pleasant life!